Peel-and-Stick IP68 Pressure Equalization
Protect Outdoor Enclosures Without Drilling a Single Hole
Gore's VE7, VE8, and VE9 series adhesive vents deliver IP64–IP68 ingress protection with a simple peel-and-stick installation — no threads, no tools, no compromises on seal integrity.
Peel-and-stick ePTFE membrane vents (VE7/VE8/VE9 series) for outdoor telecom enclosures, junction boxes, and LED luminaires. These adhesive-backed vents equalize pressure caused by temperature fluctuations and altitude changes, preventing condensation build-up and seal failure — all while blocking liquid water and particulate contamination to IP64–IP68 standards. EU REACH compliant and RoHS compatible.
Why Choose Gore Adhesive Outdoor Electronics Vents?
Zero-Modification Installation
Adhesive-backed mounting eliminates the need to drill, tap, or ultrasonically weld enclosures. Engineers can apply vents to flat or slightly curved surfaces in seconds, dramatically reducing assembly time on telecom cabinets, smart meters, and outdoor junction boxes — including post-manufacture retrofits.
IP64–IP68 Ingress Protection
Gore's expanded PTFE (ePTFE) membrane is hydrophobic by nature, repelling liquid water while allowing air and water vapor to pass freely. This maintains pressure equilibrium without admitting moisture, protecting electronics from condensation-induced corrosion in outdoor 5G base stations, IoT nodes, and street lighting controllers.
EU REACH & RoHS Compliance
Fully compliant with EU REACH regulations and compatible with RoHS-restricted product lines, these vents are suitable for electronics shipped throughout Europe and Israel without additional documentation burden or substance-of-concern declarations.
Technical Specifications
- Series
- VE7 / VE8 / VE9
- Ingress Protection
- IP64 to IP68
- Membrane Material
- Expanded PTFE (ePTFE)
- Mounting Method
- Pressure-sensitive adhesive
- Operating Temperature
- -40°C to +85°C
- Chemical Compliance
- EU REACH, RoHS compatible
- Surface Compatibility
- Flat or low-curvature enclosure walls
- Typical Diameter
- 7–25 mm (series dependent)
Applications
- 5G small-cell and macro base station outdoor enclosures
- Smart meter and AMI junction boxes exposed to rain and dust
- LED street luminaire housings requiring condensation control
- IoT gateway and edge-compute outdoor enclosures
- Solar inverter and battery management system housings
- CCTV and traffic monitoring camera enclosures
Industries Served
Part Numbers
Reference these part numbers when requesting a quote. Contact RSTECH Electronics for pricing, availability, and samples in Israel.
Part numbers sourced from gore.com. Custom configurations and additional variants may be available — contact RSTECH for details.
Frequently Asked Questions
What surface preparation is needed before applying adhesive vents?
The mounting surface should be clean, dry, and free of oils, release agents, or dust. Isopropyl alcohol wiping is typically sufficient. Gore recommends a dwell time of 24–72 hours at room temperature before subjecting the assembly to pressure differential or water spray testing.
Can adhesive vents withstand high-pressure water jets (IP69K)?
The VE7/VE8/VE9 adhesive series is rated to IP68 (continuous submersion). IP69K (high-pressure steam jet) requires the screw-in vent series. If your enclosure requires IP69K, contact RSTECH to discuss the screw-in vent alternatives.
What is the difference between VE7, VE8, and VE9?
The series differ primarily in membrane area, airflow rate, and protection level. VE7 targets IP64–IP65 applications with smaller footprints; VE8 and VE9 provide higher airflow and IP67–IP68 ratings for larger enclosures with greater internal volume. RSTECH can help select the correct variant for your enclosure volume and temperature cycle requirements.
Are these vents available through RSTECH Electronics in Israel?
Yes. RSTECH Electronics is the authorized Gore representative in Israel. We supply Gore adhesive vents with full technical support, including selection assistance, sample evaluation, and volume procurement. Contact us for pricing and lead times.
Ready to source Adhesive Outdoor Electronics Vents in Israel?
Contact RSTECH Electronics — your authorized Gore representative in Israel.